15 July 2008
Riveting of rear spar on vertical stabilizer
1.5 hours
 |
| Rear spar (Full size) Next I cleco'd in the rear spar and started the riveting of this to the skin and the ribs. Most of the rivets are done with the squeezer, but I had to use the gun on 2 rivets near the middle rudder brackets. The squeezer wouldn't quite get on the rivets, not enough clearance. |
 |
| Vertical Stabilizer finished (Full size) I cleaned off the blue ink writing and the vertical stabilizer is done. |
Next | Prev
