Hours: 18.0

• Making Tables
• Received Avery Toolkit
• Wing stand

Hours: 198.7

Horizontal Stabilizer - 56.0

• Received the Empennage kit
• Assembling hs spars
• Match drilling horizontal stab spars and skins
• Dimpling and Countersinking hs skins and spars
• Dimpling hs skin and priming ribs
• Priming and assembling front spar
• Assembling and Riveting Left Horizontal Stabilizer
• Riveting the left horizontal stabilizer
• Riveting right horizontal stabilizer and rear spar
• Horizontal Stab finished
• Drilling attach angles
• Riveting attach angles
• Working on fiberglass tips

Vertical Stabilizer - 15.5

• Assembling Vertical Stabilizer
• Deburring, dimpling, vertical stabilizer
• Priming, riveting Vertical Stablizer spars
• Riveting Vertical Stabilizer
• Riveting of rear spar on vertical stabilizer

Rudder - 43.5

• Making rudder skin stiffeners
• Finishing rudder skin stiffeners
• Assembling rudder skeleton
• Finish rudder assembly, begin deburr
• Deburring, dimpling rudder skeleton
• Riveting rudder skeleton
• Riveting rudder skeleton
• Riveting rudder skin
• Riveting rudder skin to spar
• Riveting rudder ribs
• Riveting trailing edge
• Fitting fiberglass tips

Right Elevator - 30.0

• Making elevator stiffeners
• Skin and stiffener work
• Primed stiffeners
• Assembling skeleton
• Match drilling skins
• Priming, riveting elevator
• Riveting skin stiffeners and spar
• Riveting skin to spar
• Riveting skin, glueing trailing edge
• Riveting trailing edge

Left Elevator - 53.7

• Skin and stiffener work
• Primed stiffeners
• Assembling Left Elevator
• Deburring, Priming spars
• Riveting left elevator skeleton
• Riveting elevator horn
• Assembling elevator skeleton
• Tech Counseler visit & Left Elevator riveting
• Started Trim Tab
• Riveting Trim tab
• Assembling trim tab
• Riveting trim tab hinge
• Installing trim tab servo
• Installing hinge rod ends, servo pushrod
• Fitting elevator to horizontal stabilizer
• Skin and stiffener work
• Primed stiffeners

Hours: 410.5

Setup - 7.0

• Wing kit arrives
• Building aileron and flap table

Left Wing - 170.5

• Prepping forward spar
• Installing tie-down
• Drilling rear spar
• Assembling rear spar
• Deburring ribs
• More Rib deburring
• Rib deburring, etc, etc
• Rib deburring and fluting
• Finished ribs, final drilling ribs to spars
• Finishing ribs
• Priming ribs
• Priming more ribs
• Riveting ribs to spars
• Building the wing jig
• Drilling top wing skins
• Drilling bottom wing skins, Starting tank
• Assembling ribs in tank
• Assembling tank
• Fitting tank to wing
• Countersinking tank skin
• Tank attach angle
• More tank assembly
• Preparing parts for final assembly
• Riveting stiffeners to tank
• Catching up
• Dimpling skins
• Cleaning and priming wing skins
• Riveting outer nose rib and skin assembly
• Riveting assembly to spar
• Finish sealing the tank
• Bolting on tank
• Riveting upper skin
• Landing light work
• Riveting upper wing skin
• Aileron Hinges
• Flap Hinges
• Flap hinge angles
• Tech Counseler Visit
• Fabbing pushrod tubes
• Installing aileron bellcrank
• Removing Left Fuel tank Cover

Right Wing - 145.5

• Installing nutplates on spar
• Installing tie-down bracket
• Rear spar assembly
• Drilling wing ribs
• Riveting ribs to spars
• Assembling leading edge
• Assembling tank
• Drilling tank
• Countersink skin to baffle holes
• More tank prep
• Tank fab work
• More Tank fab work
• Tank hatch assembly and fuel vent line
• Assembling cap plates
• More tank details
• Skin prep work
• Building tank
• Fabricating fuel pickup tube
• Installing baffle
• Sealing bracket and baffle rivets
• Deburring and Dimpling
• Dimpling skins
• Priming parts
• Wing spar countersinking
• Riveting leading edge to spar
• Bolted tank to spar
• Riveting upper wing skins
• Installing aileron hinges
• Working on flap hinges
• Installing flap hinge angles
• Drilling landing light lens
• Adjusting W-918 aileron pushrods

Ailerons - 37.2

• Assembling left spar
• Assembly of aileron
• Riveting A-910 stiffeners to skins
• Assembly of left aileron
• Riveting left aileron
• Starting on right aileron
• Assembling Right Aileron
• Priming skins and stiffeners
• Riveting Skins and Stiffeners
• Riveting right aileron
• Finishing right aileron

Flaps - 50.3

• Left flap leading edge ribs
• Start assembling left flap
• Drilling skin holes
• Assembling right flap
• Drilling right flap
• Painting left flap parts
• Riveting left flap
• Riveting left flap skeleton
• Riveting upper flap skin
• Riveting lower skin
• Prepping Right Flap parts
• Riveting Right nose ribs
• Riveting right flap skeleton
• Riveting right flap
• Riveting lower skin

Hours: 369.5

Bulkheads - 82.6

• Inventory of Fuselage Kit
• Overhead shelf
• Starting firewall
• Deburring firewall parts
• Deburring, painting, Riveting firewall
• Riveting F-904 bulkhead
• Control Column assembly
• Building brackets
• F-705 Seat belt brackets
• F-706 Bulkhead and catch-up
• Riveting F-706 bulkhead
• After Bulkhead parts
• Cleaning and painting parts
• Riveting aft-bulkhead parts
• Cutting longerons
• Bending longerons

Tailcone - 30.5

• Assembling tailcone for drilling
• Alignment and final drilling
• Deburring, dimpling
• Priming and assembling
• Riveting tailcone

Center Section - 36.9

• Trimming seat frames
• Installing nutplates on seat ribs
• Assembling Center section
• Baggage rib work
• Finishing center section assembly and drilling
• Priming, started final assembly
• Fitting F-915 ribs
• Riveting center section skin
• Finished riveting

Forward Section - 62.3

• Floor skins and fitting tailcone and center section
• Fitting forward side skins
• Bending side skins
• Drilling longerons
• Longeron work forward of F-904 bulkhead
• Left Lower Longeron
• Gusset work
• Lower Longeron, web, Gusset
• Landing Gear web
• Riveting webs and starting rudder pedals
• Rudder pedal Work
• Baggage compartment ribs
• Floor Stiffeners
• Disassembling, deburring, painting

Forward Assembly - 44.6

• Riveting landing gear webs
• Assembling Fuselage
• Riveting fuselage
• Rolling it over
• Leveling fuselage
• Drilling aft deck
• Aft deck shims
• Riveting aft deck
• Forward gussets and canopy rails
• Riveting side rails

Skins/Baggage - 51.7

• Fitting upper skins
• Drilling upper skins
• Bellcrank work
• Fitting WD-657 steps
• Finishing steps
• Left Brake Pedals
• Bulkhead covers
• Seat backs
• Finishing seat backs
• Fuselage Gussets
• Riveting baggage compartment floors
• Shimming nutplate for Baggage Compartment
• Baggage Bulkhead
• Installing Baggage Bulkhead Fasteners

Floors/Seats - 33.4

• Fabbing and Drilling seat hinges
• Putting in Seat Floors
• F-741 Cover
• Seatbelt brackets
• Installing Seat Belt Brackets
• Painting floor panels
• Drilling flap actuator
• Heat Baffle
• Fuel Valve Housing

Fuselage Systems - 26.5

• Assembling Brake Pedals
• Installing Brake Pedals
• Aileron Trim Bracket
• Flap Weldment fitting
• Flap Motor Mount
• Flap Motor Housing
• Main Gear Weldments
• Drilling Main Landing Gear Weldment
• Finish drilling MLG mounts

Fwd Upper Fuselage - 1.0

• Fabbing fwd deck parts

Hours: 0.0